BALMERO 35 + 45 Complete set 1,000 with glass

BALMERO 35 + 45 Complete set 1,000 with glass

The complete set 1,000 with glass with the profile dimensions 35 x 45 mm allows for a design without glass projection. The glass stock program includes more than 1,000 glass panes.

  • Elegant profile with 45 mm width and depth 35
  • Attachment to the window frame profiles and to the soffit
  • Design without glass projection
  • Centre posts 35
  • Glass thicknesses of LSG 2 x 6 mm (PVB 1.52)
  • Pane heights of 980 mm, glass width from 800 up to 1,700 mm in 20 mm increments
  • Plastic end cover
  • Accessories
    • Aluminium end cover (optional)
    • Glass edge guard profile made of stainless steel and aluminium
    • Roller blind rail
    • Screws

     

Profile length
(mm)
Surfaces
NaturalStainless steeleffectAnthracite
RAL 7016
White
RAL 9016
RAL
according to customer specifications
1,000

 

Glass stock program
Pane heights of 980 mm, glass width from 800 up to 1,700 mm in 20?mm increments LSG 2 x 6 mm

Go to Glass stock program

  • DIN 18008-4 tested
  • With General Building Inspectorate Test Certificate (AbP)
  • Approved type statics for
    • Glass
    • Support profile
    • Attachment to window frames
  • LGA-tested safety
DIN 18008-4 tested
With general supervisory test certificate (AbP)
With tested standard structural analysis
LGA-tested safety

Fall-proof glazing

Fall-proof vertical glazing is glazing with a maximum incline of 10° from the vertical. Fall-proof vertical...

SYSTEM PROFILE

A high-quality aluminium profile forms the basis of the BALMERO complete set 1,000 with glass and consists of a basic profile and a glazing bead.

Glassline French balcony fall protection BALMERO Basic profile
Basic profile Aluminium. Available length: 1,000
Glassline French balcony fall protection BALMERO Glass bead
Glass bead material: Aluminium. Available length: 1,000
Glassline French balcony fall protection BALMERO
Composed
Glassline French balcony fall protection BALMERO Gaskets
Gaskets material: EPDM.
Glassline French balcony fall protection BALMERO Basic End covers
End covers at bottom and top, without glass projection, Material: Plastic (optionally aluminium)
Glassline French balcony fall protection BALMERO Stainless steel glass edge guard profile
Stainless steel glass edge guard profile 6 mm in height. Material: Stainless steel Surface: Polished incl. adhesive attachment. For LSG 2 x 5 mm, 2 x 6 mm, 2 x 8 mm
Glassline French balcony fall protection BALMERO Aluminium glass edge guard profile
Aluminium glass edge guard profile 6 mm in height. Material: Aluminium Surfaces: Natural untreated, colour silver (similar to EGEV1), RAL 7016 (anthracite), RAL 9016 (traffic white), RAL 9005 (deep black) incl. adhesive attachment. For LSG 2 x 5 mm, 2 x 6 mm, 2 x 8 mm

Installation instructions

When mounting to wooden elements, the customer must ensure that the wood and the attachment areas are permanently protected against penetrating moisture (such as with a suitable intermediate layer).

All screw connections must be permanently secured using a threadlocker (e.g. Loctite).

Installation instructions

Glassline French balcony fall protection BALMERO – Installation instructions video
Watch BALMERO installation instructions video
Glassline French balcony fall protection BALMERO Installation instructions step 1
1. Press the contact guard onto the support bracket. Then guide the support bracket through the groove and secure with M5 threaded pins x 5. Tightening torque approx. 6 Nm.
Glassline French balcony fall protection BALMERO Installation instructions step 2
2. Screw the end cover to the bottom of the basic profile using M5 threaded pins x 5. Tightening torque: 6 Nm.
Glassline French balcony fall protection BALMERO Installation instructions step 3
3. Fit to substructure with suitable screws. In the case of boreholes marked in red, the profile must be screwed in.
Glassline French balcony fall protection BALMERO Installation instructions step 4
4. Press the EPDM inner gasket onto the basic profile. OPTION: Clip in the LED rail.
Glassline French balcony fall protection BALMERO Installation instructions step 5
5. Place the pane of glass with contact guard fitted on the support bracket and align using a spirit level. Ensure that the minimum glass mounting depth of 18 mm is adhered to while doing so.
Glassline French balcony fall protection BALMERO Installation instructions step 6
6. Clip the glazing bead onto the basic profile.
Glassline French balcony fall protection BALMERO Installation instructions step 7
7. For the outer gasket: Peel off the EPDM seal and press between glass pane and glazing bead.
Glassline French balcony fall protection BALMERO Installation instructions step 8
8. Screw in M5 stud screw so far that when the cover is inserted into the BALMERO profile, a clamping effect is achieved. If necessary, hammer the cover into the BALMERO profile with a plastic hammer. Finished!